Due to the current situation near our borders, the conference will be held in a HYBRID format.

Topics

Section 1 - Advanced Manufacturing Processes

Paper_ID	Paper Title	Authors	Affiliation
*ID09*	Contributions on the design of techno-economic indicators in the framework of integrated service of local and regional interest	DEAC-SUTEU Dorin-Vasile¹ ȚÎȚU Aurel-Mihail²	¹National University of Science and Technology POLITEHNICA Bucharest, România ²Lucian Blaga University of Sibiu, România
*ID15*	Implementation project management of a robotic manufacturing cell using the critical path method	INDRE Claudiu-Ioan¹ BLAGA Florin-Sandu¹ NEGRĂU Dan-Claudiu¹ HULE Voichița-Ionela¹ GROZA Mihai-Dan¹	¹University of Oradea, România
*ID16*	Integrated lean manufacturing and its application at workstation level	FRUMUȘANU Gabriel¹ EPUREANU Alexandru¹	¹“Dunărea de Jos” University, Galați, România
*ID17*	Elaboration of steels in electric arc furnaces (EAF) and environmental protection	IOANA Adrian¹ CONSTANTIN Nicolae¹ MARCU Dragoș Florin¹ PASARE Vili¹ POLIFRONI Massimo² NICOLICESCU Claudiu³	¹National University of Science and Technology POLITEHNICA Bucharest, România ²University of Turin, Italy ³University of Craiova, România
*ID18*	Contributions on gears manufacturing for precessional transmissions by injection molding and additive methods	BUGA Alexandru¹ BREGNOVA Alina¹	¹Technical University of Moldova
*ID20*	A particular operation of the synchronous machine and its technical implications	CAMPEANU Aurel¹	¹University of Craiova, România
*ID25*	Optimization of ann used to predict the surface roughness in dry turning of uns A97075 aeronautical aluminum alloy	REPISO Ignacio¹ MARTÍN-BEJAR Sergio¹ Javier TRUJILLO Francisco¹ SEVILLA Lorenzo¹	¹University of Malaga, Spain
*ID34*	Considerations regarding the optimal dimensional design of machining technologies	STRONCEA Aurel¹ TOCA Alexei¹ NIȚULENCO Tatiana¹	¹Technical University of Moldova
*ID36*	Technological aspects of 3d printing of mechanical gears: 3d printing accuracy of surfaces and dimensional chain	CANDRAMAN Sergiu¹ GLADÎȘ Vitalie¹	¹Technical University of Moldova
*ID38*	Influence of fused filament fabrication raster parameters over the top surface topography	ERMOLAI Vasile¹ SOVER Alexandru²	¹Technical University „Gh. Asachi” of Iasi, România ²Ansbach University of Applied Science, Germany
*ID50*	Determination of eigenfrequencies for some ultrasonic horns specific to hybrid electrochemical machining	ENCIU Cornel-Cristian¹ GHICULESCU Liviu-Daniel¹	¹National University of Science and Technology POLITEHNICA Bucharest, România
*ID53*	An overview of existing statistic methods for selecting optimal process planning	AVRAMOVA Tanya¹ VASILEVA Dimka¹ PENEVA Teodora¹	¹Technical University of Varna, Bulgaria
*ID54*	Some aspects regarding the recycling of composite materials used in automotive	ILEA Sandu¹ POP Petru-Adrian¹	¹University of Oradea, România
*ID55*	Contributions to increasing the quality of outer threads obtained through 3d printing	RIZEA Alin-Daniel¹ ANGHEL Daniel-Constantin¹ BANICA Cristina-Florena¹	¹University of Pitești, România
*ID57*	Utilizing modern methods and technologies in concrete design products	TODOROVA Tsveta¹ DOVRAMADJIEV Tihomir¹ MURZOVA Tsena¹ MURZOVA Mariana¹ DOBREVA Darina¹	¹Technical University of Varna, Bulgaria
*ID59*	Simulation and practical investigations of inductively assisted machining using the example of turning operations	ARNOLD Frank¹ MANUR KRISHNAMUTHY Niranjan¹ PRASSE Johannes PENTER Lars¹ IHLENFELDT Steffen¹	¹Technical University Dresden, Germany
*ID66*	Digital twin in blending technologies: integration of technology and logistics using internet of things solutions	BÁNYAI Ágota¹	¹University of Miskolc, Hungary
*ID72*	The elaboration of a research and development process within the headquarters and implementation in the subsidiary	GHENA Marian-Florentin¹ GHICULESCU Liviu-Daniel¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România
*ID73*	Study on the cutting forces during face milling of a hard steel	MALEA Claudiu-Ionuț¹ NIȚU Eduard-Laurențiu¹ BĂDULESCU Claudiu² IORDACHE Daniela-Monica¹	¹National University of Science and Technology POLITEHNICA Bucharest, Pitesti University Center, Romania ²ENSTA Bretagne, Research Institute Dupuy de Lôme, France
*ID76*	Device for milling circular arc tooth trace cylindrical gear	GRĂMESCU Traian¹ SLĂTINEANU Laurențiu¹ HRIȚUC Adelina¹	¹Technical University „Gh. Asachi” of Iasi, România
*ID98*	Possibilities of obtaining complex geometries using additive manufacturing with liquid photopolymers	BESNEA Daniel¹ MORARU Edgar¹ SPANU Alina¹ CONSTANTIN Victor1 DINU Elena¹ PANAIT Iolanda¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România
*ID108*	Ni-Ti Multifunctional materials sintered via concentrated solar energy	CROITORU Catalin¹ ROATĂ Ionuț Claudiu¹	¹ Transilvania University of Brasov, România
*ID109*	Multifunctional Ni-Cr-Al-Y coatings via thermal spraying	ROATĂ Ionuț Claudiu¹PLAMADEALA Ioan¹ UNCU Ionuț¹	¹ Transilvania University of Brasov, România
*ID110*	Mechanical properties of PETG-Based Materials Destined for 3D-Printing	PLAMADEALA Ioan¹ ROATĂ Ionuț Claudiu¹ POP Mihai Alin¹	¹ Transilvania University of Brasov, România
*ID113*	The influence of 3d printing parameters and heat treatment on tribological behavior	PORTOACĂ Alexandra-Ileana¹ RÎPEANU George-Răzvan¹ NAE Ion¹ TĂNASE Maria¹	¹ Petroleum-Gas University of Ploiești, România
*ID120*	Contributions regarding the solution of the automatic on-the-fly adjustment during the working process with chip probe over the values of the cutting regimes at CNC machining centers and flexible cells, based on the principles of fuzzy sets	MIZGAN Horea¹ BLAGA Florin Sandu¹	¹University of Oradea, România
*ID121*	Tool wear prediction by deep learning from visibility graph representation of time series data	TÜRKER İlker¹ TAN Serhat Orkun¹ KUTLUANA Gökhan¹	¹ Karabuk University, Turkey
*ID125*	Experimental study on multipass AWJ performance on Hardox 500 workpieces	DEKSTER Lisa¹ KARKALOS Nikolaos² KUDELSKI Rafał¹ KARMIRIS-OBRATANSKI Panagiotis¹	¹ AGH University, Cracow, Poland ² School of Mechanical Engineering, National Technical University of Athens, Greece
*ID134*	Transport properties of cerium oxide doped in gadolinium used for electrical batteries manufacture	BĂILĂ Diana¹ TONOIU Sergiu¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România

Section 2 - Surface Engineering

Paper_ID	Paper Title	Authors	Affiliation
*ID08*	Nanostructured layers deposition for self-cleaning glass	ILIESCU Mihaela¹ BEȘLEAGĂ Cristina² NIȚU Cristina¹ TOMULESCU Andrei² PINTILIE Ioana² MELINTE Octavian¹ ROȘU Maria-Magdalena³	¹Institute of Solid Mechanics, Romanian Academy ²National Institute of Materials Physics, România ³ National University of Science and Technology POLITEHNICA Bucharest, România
*ID84*	Tribological characteristics of Digital Light Processing (DLP) additive manufactured components	MACOVEI Gheorghe¹ STAMATE Ciprian Vasile¹ PALEU Viorel¹	¹Technical University „Gh. Asachi” of Iasi, România
*ID85*	Evaluation of savitzky-golay filtering applied to vibroartographic signals acquired at the knee level and its impact on the crest factor	ȘMADICI Denisa^1,2 PALEU Viorel¹	¹Technical University „Gh. Asachi” of Iasi, România ²“Grigore T. Popa” University of Medicine and Pharmacy Iași, România
*ID123*	Piston scraper ring lifetime prediction by modeling and numerical analysis	FATIHI Sophia¹ CROITORESCU Valerian² OUABIDA Elhoussaine¹ MHARZI Hassan¹	¹National School of Applied Sciences from Ibn Tofail University in Kenitra, Morocco ² National University of Science and Technology POLITEHNICA Bucharest, România
*ID127*	Spectral and sem electron microscopy analysis of graphite film, deposited by the procedure of electrical discharges in impulse in under-excitation regime, using pyrolytic graphite cathode	MARIN Laurențiu¹	¹National Institute for Research and Development in Chemistry and Petrochemistry ICECHIM Bucharest
*ID131*	Segmentation and reconstruction of abdominal aortic aneurysm surface models towards the creation of in silico patient cohorts	MANOPOULOS Christos ¹ PLAVOUKOS Christos ² KRINI Evangelia² PERIVOLIOTI Vasiliki ² KARAGIORGOU Vayia-Despina ² MOULAKAKIS Konstantinos³ KAKISIS Ioannis ⁴ RAPTIS Anastasios ¹ VAXEVANIDIS Nikolaos²	¹School of Mechanical Engineering, National Technical University of Athens, Greece ²School of Pedagogical and Technological Education (ASPETE), Greece ³School of Medicine, University of Patras, Greece ⁴Attikon University Hospital, National and Kapodistrian University of Athens, Greece

Section 3 - Advanced Materials

Paper_ID	Paper Title	Authors	Affiliation
*ID04*	Surface quality assessment for end-milled AL7136 parts using PCA	POP Alina-Bianca¹ ȚÎȚU Aurel-Mihail²	¹Technical University of Cluj-Napoca ²Lucian Blaga University of Sibiu
*ID30*	Conceptual design of multifunctional reconfigured architectures for electromagnetic nondestructive evaluation	IFTIMIE Nicoleta¹ SAVIN Adriana¹ STEIGMANN Rozina¹ FABO Peter² FAKTOROVA Dagmar²	¹National Institute of R&D for Technical Physics, Iași, România ² Trenčín University of Alexander Dubček, Slovak Republiq
*ID31*	Research on evaluating mechanical performances of CFRP materials	MITITELU Ionut^1,2 IFTIMIE Nicoleta² SAVIN Adriana² DOBRESCU Gabriel-Silviu² BARSANESCU Paul-Doru¹	¹Technical University „Gh. Asachi” of Iasi, România ²National Institute of R&D for Technical Physics, Iași, România
*ID69*	Characterisation of printing conditions of powder-reinforced resin by LCD technology	BOCA Marius-Andrei^1,2 SOVER Alexandru² SLĂTINEANU Laurențiu¹ ERMOLAI Vasile¹	¹Technical University „Gh. Asachi” of Iasi, România ² Ansbach University of Applied Science, Germany
*ID80*	Computational thermodynamics approach for phase prediction of Ni-based alloy	BALANOU Maria¹ MARKOPOULOS Angelos¹	¹National Technical University of Athens (NTUA), Greece
*ID93*	Overview of nanoparticles enhanced with thermal oils for heat transfer applications	CHERECHEȘ Elena Ionela¹ COJOCARIU Nicoleta¹ MINEA Alina Adriana¹	¹Technical University „Gh. Asachi” of Iasi, România

Section 4 - Development of Mechanical Transmissions

Paper_ID	Paper Title	Authors	Affiliation
*ID05*	The contact problem in multipare convex-concave precessional gearing	BALAN VICTOR¹ (MD) KULEV MIHAIL¹ (MD)	¹Technical University of Moldova
*ID06*	Some aspects of the technology for manufacturing precessional gears with non-standard profile	MAZURU SERGIU¹ SCATICAILOV SERGHEI²	¹Technical University of Moldova ²The Engineering College from Strășeni, Moldova
*ID10*	Precessional transmissions with multiple convex-concave gears: structural synthesis, kinematics and contact bearing, generation of surfaces	BOSTAN ION¹	¹Technical University of Moldova
*ID14*	Experimental research of precessional transmissions with multipair convex-concave gears: data acquisitions, experimental samples and result	VACULENCO Maxim¹ BODNARIUC ION¹ (MD) CIOBANU OLEG¹ (MD) CIOBANU RADU¹ (MD) MALCOCI IULIAN¹ (MD) TRIFAN NICOLAE^1,2 VENGHER DUMITRU²	¹Technical University of Moldova ²College of Technical University of Moldova
*ID41*	Relative sliding in multipair convex concave contact of teeth, within precessional gearing	BOSTAN Viorel¹ BOSTAN Ion¹ VACULENCO Maxim¹ ȚOPA Mihai¹	¹Technical University of Moldova
*ID45*	Design and optimal modeling of unconventional worm gear with bearings	NINACS Roland¹ HARAGÂȘ Simion¹	¹Technical University of Cluj-Napoca
*ID46*	Determination of the tribotechnical characteristics of the materials used for precessional transmissions design	POȘTARU Gheorghe¹ STOICEV Petru¹ POȘTARU Andrei¹ BODNARIUC Ion¹ BUGA Alexandru¹ PLATON Andrei¹	¹Technical University of Moldova
*ID81*	Numerical calculation of the multipare convex-concave precession gear	LEALIN Stanislav¹	¹Technical University of Moldova

Section 5 - CAD/CAE/CAM/CAPP Systems for Design, Manufacturing and Assembling

Paper_ID	Paper Title	Authors	Affiliation
*ID01*	Modern approach for design and manufacturing of products using FDM process	CIOBANU Radu¹ CIOBANU Oleg¹ MALCOCI Iulian¹ KROMA Arkadiusz²	¹Technical University of Moldova ²Poznan University of Technology, Poland
*ID07*	Minimizing blade-fluid energy losses in centrifugal hydraulic pump impellers	BOSTAN VIOREL¹ PETCO ANDREI¹	¹Technical University of Moldova
*ID13*	A case study of the tool paths strategies applicable for milling complex surfaces on a three coordinates CNC machines	BÎCIOC Mihail¹	¹Technical University of Moldova
*ID21*	Experimental investigation and Taguchi analysis on the drilling parameters of a structural Aluminium alloy	TZOTZIS Anastasios¹ EFKOLIDIS Nikolaos¹ MANAVIS Athanasios¹ KYRATSIS Panagiotis¹	¹University of Western Macedonia, Greece
*ID27*	Holistic product design for the fur fabric industry: a floor lamp design approach according to brand principles	MANAVIS Athanasios¹ LIOKOS Thomas¹ EFKOLIDIS Nikolaos¹ KYRATSIS Panagiotis¹	¹University of Western Macedonia, Greece
*ID58*	Design and analysis of 3d modeled soft pneumatic actuators for use in hand rehabilitation devices	ARNĂUȚ Felix Liviu¹ DEACONESCU Tudor¹	¹ Transilvania University of Braşov, România
*ID61*	Finite element models for the analysis of the effectiveness of the vertical vibration reduction method of the railway vehicle carbody with anti-bending system – Applications for an experimental scale model	DUMITRIU Mădălina¹ SOROHAN Ștefan¹ APOSTOL Ioana Izabela¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România
*ID62*	Data acquisition software application dedicated to the demonstrative experimental system for functionality testing of a new method of reducing vertical vibration of the railway vehicle car body	GHEȚI Marius Alin¹ DUMITRIU Mădălina¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România
*ID64*	Dynamic behaviour of a freight wagon with wheel flat when running on the track	DINU Vlăduț-Marian¹ MAZILU Traian¹ DINU Ana-Maria¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România
*ID67*	3D Modeling and fem analysis on metal coin embossed edge lettering dies	GAVRILĂ Cornel Cătătlin¹ LATEȘ Mihai Tiberiu¹	¹Transilvania University of Braşov
*ID71*	The development of an innovative product to reach the current trends in the power tools industry	GHENA Marian-Florentin¹ GHICULESCU Liviu-Daniel¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România
*ID86*	Cost optimisation for assigned tolerance to a 2D dimensional chain using GeoGebra software	TULCAN Aurel¹ BANCIU Felicia Veronica¹ GROZAV Ion¹	¹Politehnica University of Timişoara, România
*ID91*	Influence of clearances on the quality of the metal cages window of radial bearings with cylindrical rollers	RIPANU Marius Ionuț¹ MIHALACHE Marius Andrei¹ VASILEVA Dimka² AVRAMOVA Tanya² PANEVA Teodora²	¹Technical University „Gh. Asachi” of Iasi, România ²Technical University of Varna, Bulgaria
*ID94*	The influence of cutting milling parameters on surface roughness for pretreated mold steels	POPESCU Cristian-Eusebiu¹ BUT Adrian²	¹ Evopart Company, Timisoara, România ²Politehnica University of Timisoara, România
*ID95*	Optimization of the CNC processing function of requirements and capabilities	BUT Adrian¹ POPESCU Cristian-Eusebiu²	¹ Politehnica University of Timisoara, România ² Evopart Company, Timisoara, România
*ID101*	Simulation of ballast transfer for pontoons	HALUS Andrei¹ SEVERIN Irina¹ ACOMI Nicoleta²	¹ National University of Science and Technology POLITEHNICA Bucharest, România ² Constanta Maritime University, România
*ID104*	Pantograph–catenary dynamics simulation for high-speed trains	SPIROIU Marius-Adrian¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România
*ID105*	Study on the aerodynamics of freight trains used in container transport	ARSENE Sorin1¹ SPIROIU Marius-Adrian¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România
*ID112*	Integrated CAE/CAD system for parametric design of mechanical assemblies	TĂMĂȘAN Mihai¹ PRADA Gabriel¹ POP Florin Alin¹ BLAGA Florin¹	¹ University of Oradea, România
*ID115*	Effect of the infill pattern on sound absorption properties of the 3d printed parts	POP Mihai-Alin¹ COȘNIȚĂ Mihaela¹ ZAHARIA Sebastian Marian¹ MATEI Simona Corina¹ SPÎRCHEZ Cosmin¹	¹ Transilvania University of Brasov, România
*ID128*	The application of specialized software in design for the creation of complex shapes	FRUNZE Valentina¹ FLOREA-BURDUJA Elena¹ RARU Aliona¹ IROVAN Marcela¹	¹Technical University of Moldova
*ID129*	Research on the creation of spatial forms using molding technique	FLOREA-BURDUJA Elena¹ RARU Aliona¹ FRUNZE Valentina¹ IROVAN Marcela¹	¹Technical University of Moldova

Section 6 - Automation and Robotics

Paper_ID	Paper Title	Authors	Affiliation
*ID03*	Contributions to the design and implementation of an advanced electronic system for controlling the elongation of the vertebral column	ȚÎȚU Aurel-Mihail¹ BOGORIN-PREDESCU Adrian² BOGORIN-PREDESCU Oana-Maria¹ ȚÎȚU Ștefan^{3, 4}	¹Lucian Blaga University of Sibiu ² National University of Science and Technology POLITEHNICA Bucharest, România ³Prof. Dr. Ioan Chiricuță Institute of Oncology, Cluj-Napoca ⁴Iuliu Hatieganu University of Medicine and Pharmacy Cluj Napoca
*ID19*	Automation, control and monitoring of the rotation oscillation plane within Foucault pendulum	MUNTEANU Eugeniu¹ SECRIERU Vitalie¹ DOROGAN Andrei¹	¹Technical University of Moldova
*ID28*	The role of automation in data-driven science	CUJBA Rodica¹	¹Technical University of Moldova
*ID48*	Evaluation of seed flow uniformity distributed by seed drill inclined fluted roller at computer aided installation	GHEORGHITA Andrei¹	¹Technical University of Moldova
*ID52*	Experimental research on positioning accuracy of educational robots	CHITARIU Dragos-Florin¹ AGACHE Teodora-Maria¹ DUMITRAS Cătălin-Gabriel¹ EDUTANU Florin-Daniel¹ CHIRIAC George-Gabriel¹ HORODINCĂ Mihaiță¹	¹Technical University „Gh. Asachi” of Iasi, România
*ID70*	The role of automation in the formation of the research competence of gift students in the framework of extra-school astronomy activities	TERCU Jan-Ovidiu¹ CHISTOL Vitalie²	¹Planetarium/Astronomical Observatory Department, “Răsvan Angheluță” Museum Complex of Natural Sciences, Galați ²Technical University of Moldova
*ID87*	Design of virtual hand to improve proprioceptive feedback for upper-limb prosthetics applications	RĂDUICĂ Florin-Felix¹ SIMION Ionel¹ ENACHE Ioana-Cătălina¹ CHIVU Oana Roxana¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România
*ID100*	Needs analysis for design and development of an educational humanoid robot	DUGĂEȘESCU Ileana¹ NEACȘU Angela Miruna¹ ENACHE Vlad-Cristian¹ NICOLESCU Alexandru Ionuț¹ ULMEANU Mihaela-Elena¹ DOICIN Cristian Vasile¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România
*ID116*	Automation and robotics for efficient container handling in port terminal: review	BACIOIU Alexandru Ștefan¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România
*ID126*	Automating the procedure for charging and equalizing the level of charge of accumulators in an electric car battery	PETROV Oleg¹	¹Technical University of Moldova
*ID130*	Enhancing speed regulation in pneumatic systems with electric flow control valves	ENACHE Florin¹ AGUD Mihai¹ VELICU Ștefan¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România

Section 7 - Green Manufacturing - Renewable Energy

Paper_ID	Paper Title	Authors	Affiliation
*ID39*	Experimental analysis of the rheological properties of hydraulic oils	TELEASA Andreea-Mirela¹ RADULESCU Alexandru Valentin¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România
*ID63*	Impact of the parameters of the rail damper upon the frequency response function of the rail	FOLOGEA Dorina¹ MAZILU Traian¹ APOSTOL Ioana Izabela¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România
*ID74*	Aspects regarding operation predictability of wind turbines	DULGHERU Valeriu¹ GUȚU Marin¹ ZAPOROJAN Sergiu¹ MUNTEANU Eugeniu¹	¹Technical University of Moldova
*ID75*	Considerations on professional risks and preventive measures in the green technologies sector	SMIDU Eduard¹ CHIVU Oana Roxana¹ NITOI Dan¹ GHEORGHE Marinela¹ BUTU Larisa¹ BORDA Claudia¹ BUJOR Constantin¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România
*ID77*	Current trend, concepts and challenges in remanufacturing of the industrial products	DIACONESCU Alexandru-Eugen¹ OANCEA Gheorghe¹	¹Transilvania University of Braşov, România
*ID89*	Algorithm for anticipating the growth kinetics of nitrided layers	COJOCARU Mihai-Ovidiu¹ BRANZEI Mihai¹ BOGDAN Florea¹ CALIN Florentina-Georfiana¹ GHINEA Andrei-Mihai¹ DRUGA Leontin-Nicolae² LAPTOIU Ștefan¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România ²ASTR
*ID90*	Current trends in designing and manufacturing of electrical vtol aircraft	MUNTEAN Serafim¹ OANCEA Gheorghe¹	¹Transilvania University of Braşov, România
*ID107*	A review of the sustainability concept in manufacturing engineering and civil engineering	FLORICA Cosmina¹ FEIER Anamaria¹ VIȘESCU Mircea¹ HERNEA Silvia¹	¹ Politehnica University of Timisoara, România
*ID111*	Environmental, social, and governance factors influencing supply chain management: a systematic literature review	UNGUREANU Cristina-Elena¹ FLEACĂ Bogdan¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România
*ID118*	Information system evaluation from a green production management perspective in an automotive sector company	POHONȚU-DRAGOMIR Ștefana-Cătălina¹ HERGHILIGIU Ionuț-Viorel¹ VÎLCU Adrian¹	¹Technical University „Gh. Asachi” of Iasi, România
*ID133*	Influence of wind turbine blades rotation on the proper functioning of terrestrial radars	RĂDULESCU Victorița¹	¹ National University of Science and Technology POLITEHNICA Bucharest, România

Topics

Paper_ID

Paper Title

Authors

Affiliation

ID09

Contributions on the design of techno-economic indicators in the framework of integrated service of local and regional interest

DEAC-SUTEU Dorin-Vasile1

ȚÎȚU Aurel-Mihail2

1National University of Science and Technology POLITEHNICA Bucharest, România

2Lucian Blaga University of Sibiu, România

ID15

Implementation project management of a robotic manufacturing cell using the critical path method

INDRE Claudiu-Ioan1

BLAGA Florin-Sandu1

NEGRĂU Dan-Claudiu1

HULE Voichița-Ionela1

GROZA Mihai-Dan1

1University of Oradea, România

ID16

Integrated lean manufacturing and its application at workstation level

FRUMUȘANU Gabriel1

EPUREANU Alexandru1

1“Dunărea de Jos” University, Galați, România

ID17

Elaboration of steels in electric arc furnaces (EAF) and environmental protection

IOANA Adrian1

CONSTANTIN Nicolae1

MARCU Dragoș Florin1

PASARE Vili1

POLIFRONI Massimo2

NICOLICESCU Claudiu3

1National University of Science and Technology POLITEHNICA Bucharest, România

2University of Turin, Italy

3University of Craiova, România

ID18

Contributions on gears manufacturing for precessional transmissions by injection molding and additive methods

BUGA Alexandru1

BREGNOVA Alina1

1Technical University of Moldova

ID20

A particular operation of the synchronous machine and its technical implications

CAMPEANU Aurel1

1University of Craiova, România

ID25

Optimization of ann used to predict the surface roughness in dry turning of uns A97075 aeronautical aluminum alloy

REPISO Ignacio1

MARTÍN-BEJAR Sergio1

Javier TRUJILLO Francisco1

SEVILLA Lorenzo1

1University of Malaga, Spain

ID34

Considerations regarding the optimal dimensional design of machining technologies

STRONCEA Aurel1

TOCA Alexei1

NIȚULENCO Tatiana1

1Technical University of Moldova

ID36

Technological aspects of 3d printing of mechanical gears: 3d printing accuracy of surfaces and dimensional chain

CANDRAMAN Sergiu1

GLADÎȘ Vitalie1

1Technical University of Moldova

ID38

Influence of fused filament fabrication raster parameters over the top surface topography

ERMOLAI Vasile1

SOVER Alexandru2

1Technical University „Gh. Asachi” of Iasi, România

2Ansbach University of Applied Science, Germany

ID50

Determination of eigenfrequencies for some ultrasonic horns specific to hybrid electrochemical machining

ENCIU Cornel-Cristian1

GHICULESCU Liviu-Daniel1

1National University of Science and Technology POLITEHNICA Bucharest, România

ID53

An overview of existing statistic methods for selecting optimal process planning

AVRAMOVA Tanya1

VASILEVA Dimka1

PENEVA Teodora1

1Technical University of Varna, Bulgaria

ID54

DEAC-SUTEU Dorin-Vasile¹

ȚÎȚU Aurel-Mihail²

¹National University of Science and Technology POLITEHNICA Bucharest, România

²Lucian Blaga University of Sibiu, România

INDRE Claudiu-Ioan¹

BLAGA Florin-Sandu¹

NEGRĂU Dan-Claudiu¹

HULE Voichița-Ionela¹

GROZA Mihai-Dan¹

¹University of Oradea, România

FRUMUȘANU Gabriel¹

EPUREANU Alexandru¹

¹“Dunărea de Jos” University, Galați, România

IOANA Adrian¹

CONSTANTIN Nicolae¹

MARCU Dragoș Florin¹

PASARE Vili¹

POLIFRONI Massimo²

NICOLICESCU Claudiu³

¹National University of Science and Technology POLITEHNICA Bucharest, România

²University of Turin, Italy

³University of Craiova, România

BUGA Alexandru¹

BREGNOVA Alina¹

¹Technical University of Moldova

CAMPEANU Aurel¹

¹University of Craiova, România

REPISO Ignacio¹

MARTÍN-BEJAR Sergio¹

Javier TRUJILLO Francisco¹

SEVILLA Lorenzo¹

¹University of Malaga, Spain

STRONCEA Aurel¹

TOCA Alexei¹

NIȚULENCO Tatiana¹

¹Technical University of Moldova

CANDRAMAN Sergiu¹

GLADÎȘ Vitalie¹

¹Technical University of Moldova

ERMOLAI Vasile¹

SOVER Alexandru²

¹Technical University „Gh. Asachi” of Iasi, România

²Ansbach University of Applied Science, Germany

ENCIU Cornel-Cristian¹

GHICULESCU Liviu-Daniel¹

¹National University of Science and Technology POLITEHNICA Bucharest, România

AVRAMOVA Tanya¹

VASILEVA Dimka¹

PENEVA Teodora¹

¹Technical University of Varna, Bulgaria

ILEA Sandu¹

POP Petru-Adrian¹

¹University of Oradea, România

RIZEA Alin-Daniel¹

ANGHEL Daniel-Constantin¹

BANICA Cristina-Florena¹

¹University of Pitești, România

TODOROVA Tsveta¹

DOVRAMADJIEV Tihomir¹

MURZOVA Tsena¹

MURZOVA Mariana¹

DOBREVA Darina¹

¹Technical University of Varna, Bulgaria

ARNOLD Frank¹

Niranjan¹

PENTER Lars¹

IHLENFELDT Steffen¹

¹Technical University Dresden, Germany

BÁNYAI Ágota¹

¹University of Miskolc, Hungary

GHENA Marian-Florentin¹

GHICULESCU Liviu-Daniel¹

¹ National University of Science and Technology POLITEHNICA Bucharest, România

MALEA Claudiu-Ionuț¹

NIȚU Eduard-Laurențiu¹

BĂDULESCU Claudiu²

IORDACHE Daniela-Monica¹

¹National University of Science and Technology POLITEHNICA Bucharest, Pitesti University Center, Romania

²ENSTA Bretagne, Research Institute Dupuy de Lôme, France

GRĂMESCU Traian¹